How to Install Pathway Lights: A Complete Guide (2024)

How to Install Pathway Lights: A Complete Guide (1)
  • Dawn B
  • December 9, 2021
  • 10:42 am

So, you’re on a journey to brighten up your landscaping. If you’ve already chosen which fixtures you’d like to add to your landscape lighting plan, it’s time to start thinking about installation. DIY installation may seem overwhelming at first glance, but we have put together a guide with simple steps to install some of DEKOR’s most popular path lights.

Note that there are some basic materials you will need for any lighting installation job, including a low-voltage transformer, cables, connectors, and the lights themselves. DEKOR’s lighting kits come with all of the materials required to get the job done. You may also need tools to ensure your lights are securely installed and your wires are sufficiently buried, like a mallet, a drill, or a shovel. We break down exactly what is needed for each type of light below.

Finally, before you get started, identify where the power sources and outlets are located in your yard and where you wish to place your lights. You’ll need to make sure that your wires are the correct length, so you can make the appropriate electrical connections to set up your lights.

Installing EZ Yard Dot LED Path Lights

Yard Dots add ground effect lighting in three easy steps: push it in, plug it in and turn it on. This may be a slight oversimplification, but these really are some of the easiest-install offerings from DEKOR.

Yard Dots are available in several different styles and packages, including kits and colored dot lights, and these installation instructions will work for any of them. It may be a good idea to purchase these lights in a kit, especially if you have not installed outdoor lights before, because they come with cables and a transformer.

DEKOR’s team has produced a video installation tutorial for Yard Dots:

Follow these steps to install your EZ Yard Dot LED Path Lights:

  1. Assemble all of the items you need for installation (included in our light kits): your Yard Dots, HD cables, an EZ Max Transformer, and a rubber mallet.
  2. Decide where you want your lights to go, and place each Dot in your desired pattern.
  3. Tap the dots halfway down into the surface – whether it’s your lawn or ground cover – so they are covered up to the wire connections. The light fixture will tolerate gentle taps from a rubber mallet if needed.
  4. Attach cables to the remaining connections to get power to the next light.
  5. When connections are completed, cover with mulch, gravel, grass, etc. There is no required bury depth.
  6. Tap lights into desired depth.

And there you go! It really is that easy to bring your outdoor lighting to the next level. Now your driveway or path will be beautifully and safely lit. You will be amazed at the huge difference these small lighting Dots make.

How to Install Mushroom or Empress Path Lighting

DEKOR offers several other path lighting options, including the Mushroom Pathway Light, the Stepped Mushroom Pathway Light, and the Empress Path Light, all available individually or as kits. While each of these light fixtures is unique, they all have the same installation instructions. You may even want to mix and match combinations of these landscape lights to make the lighting for each walkway its own.

For this installation, you may need some tools if you plan to bury wire or place lights in a hardscape surface, including a drill with a 3/4-inch auger bit and a shovel. You will also need HD wire, Plug-N-Play connectors and/or splitters, and a transformer, all included if you purchase a light kit.

Here are the steps to install these three low-voltage landscape lighting options:

  1. Locate the desired placement of lights and wiring. If you choose to bury the wire, under concrete or other permanent structures, plan accordingly.
  2. Place all lights in your preferred location. If necessary, use a 3/4″ (1.9 cm) auger within a drill to ensure the fixture is firmly in place.
  3. Run all wires from the power source locations to the lights on top of the soil, leaving them slack. If using separate circuits with independent dimmers, we recommend grouping the lights by light type.
  4. Connect all lights. Make sure connections, fixtures, and power sources (including splitters) are all working.
  5. Connect the opposite end of the male connector wire to a port on the multi-port splitter that is connected to the transformer or dimmer. You can mix and combine all lights on the same circuit but make sure you do not exceed the maximum number of lights per transformer. If running separate circuits with dimmers on each circuit, using a separate transformer for each circuit can simplify installation. However, the use of a 5-way splitter will allow for separate circuits on the same transformer.
  6. Preview light placement in the dark to make sure the effect you want is achieved. Test the lights to ensure power supply, connections, and light fixtures all work properly and placement is appropriate.
  7. Once the light, wire, and splitter placement is finalized, work from the light fixtures toward the power source to bury the wire to the desired depth. Ensure that lights are all working with all wiring attached prior to burying any wire. No more than 1 “-3” (2.5 cm – 7.6 cm) is required.

For more information about how to include dimmers in your installation and full product specs, see our installation guide. This guide also includes important safety information about installing around main lines if digging to bury cables.

These installation instructions apply to a wide variety of DEKOR lights. For example, our Telescoping LED Spotlight, the Well Uplight, and the Radiance Directional Landscape Light all use the same installation steps. So, if you plan on lighting up other parts of your yard, like a garden, you’ll become an installation master in no time.

Categories

  • Contests
  • Installation
  • Lighting Ideas
  • New Products
  • Project Showcase
  • Uncategorized

2655 S. Santa Fe Unit 4-A
Denver, CO 80223 USA

DEKOR®️ Canada Fulfillment
205 Champagne Drive, Unit 3A
Toronto, ON, M3J 2C6, Canada

Toll Free: 1-800-258-0344

Customer Care

  • My Account
  • Become a PRO/Distributor/Dealer
  • Project Estimate Form
  • Request a Color Sample
  • Request a DEKOR® Catalog

Help

  • Installation Instructions
  • Transformer Calculator
  • DEKORKONNECT WiFi Setup
  • Policies
  • Shipping

Contact Us

  • 303.991.2285 /1.800.258.0344
  • [emailprotected]

More Information

  • Latest News
  • Blog
  • Ideas

Copyright 2024| Privacy Policy | Accessibility Statement | WordPress Web Design & Hosting Santa Barbara

DEKOR® is committed to providing a website that is accessible to the widest possible audience, regardless of technology or ability.We are actively working to increase the accessibility and usability of our website and in doing so adhere to many of the available standards and guidelines.

Is your RGBW lighting system made in the USA?

Yes, DEKOR® manufactures all circuitry in Denver, CO providing excellent quality.

How do you dim the lights and change colors?

DEKOR® offers a COLORKONNECT WiFi controller and through the app you can dim the lights, change colors, and set schedules. You may also control light colors with dimming capability manually on the front face of the COLORKONNECT WiFi device.

Can you control the lights from anywhere in the world?

When using the COLORKONNECT WiFi controller app provides you the ability to control your lights regardless of where you are located.

What is the 3W4PORT splitter/repeater?

The 3W4PORT splitter/repeater has two functionalities: the splitter is used to connect the power wire and the three additional ports for 2-3 lights based on your lighting plan. The repeater is to be used every 20’ with long cable runs and at the light connections to enhance the signal creating pure colors from the first light to the last.

What type of connectors do you offer?

DEKOR® offers a simple 3W4PORT Plug-N-Play system with various cable lengths to make the install easy in any application.

How do I change the colors if I do not have my phone?

You may change colors and dim the lights manually on the COLORKONNECT device.

Can I have multiple zones to create colorful patterns?

Yes, with the use of two or more COLORKONNECT WiFi controllers and wiring two or more zones will deliver different light color patterns.

How many lights may I put on one zone?

You may power up to 60-watts of light usage or 28 individual lights.

Why should I buy DEKOR® RGBW system over the competition?

Our lights are 46% brighter and we have a dedicated pure white channel.

What cable lengths are available with your 3-wire Plug-N-Play system?

We offer a variety of lengths for any application—20”, 5’, 10’ and 20’.

If I already have the non-RGBW DEKOR® lighting system, can I add the RGBW DEKOR® lighting system?

Yes, you can add to your current non-RGBW DEKOR® lighting system by adding RGBW lights! While the non-RGBW DEKOR lighting system is a 2-wire direct current system, and the RGBW DEKOR lighting system is a 3-wire direct current system, you are able to integrate both systems by creating a separate zone. Either using a splitter running from you current transformer or upgrading to a 100 or 200 watt transformer, which has more than one output from the transformer, you can create an additional zone or zones. Please call us if you need us to walk you through this!

Does the transconnect cable work with your RGBW system?

The transconnect cable is for our standard DEKOR® Lighting 2-wire lights. The COLORCONNECT WiFi controller is a 3-wire system. The male-to-male cables come in lengths of 20”, 5’, 10’, 20’ are to be used to connect the COLORCONNECT WiFi controller and then to your first light.

Do you include the transconnect cable with every transformer?

For our RGBW system: The 36-watt and the 60-watt transformers will include one (1) 20’ 3WPNP male-to-male cable. The 100-watt transformer will come with (1) transconnect cable and (1) 20’ 3WPNP male-to-male cable. The 200-watt transformer will include (1) 20’ transconnect cable with two lead wires and (1) 20’ 3WPNP male-to-male cable.

Can I use the 6-port splitter at all in my design, along with repeaters?

The 3W4PORT splitter/repeater may only be used with the RGBW system. The 6-port splitter is a two wire and can only be used with our standard DEKOR® Lighting system.

How to Install Pathway Lights: A Complete Guide (2024)
Top Articles
Latest Posts
Article information

Author: Annamae Dooley

Last Updated:

Views: 5355

Rating: 4.4 / 5 (65 voted)

Reviews: 80% of readers found this page helpful

Author information

Name: Annamae Dooley

Birthday: 2001-07-26

Address: 9687 Tambra Meadow, Bradleyhaven, TN 53219

Phone: +9316045904039

Job: Future Coordinator

Hobby: Archery, Couponing, Poi, Kite flying, Knitting, Rappelling, Baseball

Introduction: My name is Annamae Dooley, I am a witty, quaint, lovely, clever, rich, sparkling, powerful person who loves writing and wants to share my knowledge and understanding with you.